home *** CD-ROM | disk | FTP | other *** search
- Path: ix.netcom.com!netnews
- From: liloldmn@ix.netcom.com (Michael J. Ciaccia)
- Newsgroups: comp.dcom.modems
- Subject: Re: WinRPI 2.26 and Netscape GPF
- Date: Sat, 24 Feb 1996 01:10:34 GMT
- Organization: Netcom
- Message-ID: <312e64e6.353929449@nntp.ix.netcom.com>
- References: <4gbcak$16la@news.gate.net>
- NNTP-Posting-Host: ix-chl-nj3-17.ix.netcom.com
- X-NETCOM-Date: Fri Feb 23 5:06:23 PM PST 1996
- X-Newsreader: Forte Agent .99d/16.182
-
- hoch@gate.net (Gary Hoch) wrote:
-
- >I'm trying to get the version 2.26 WinRPI driver running with a
- >Zoltrix 14.4 RPI modem using Trumpet 2.1f and Netscape 2.0.
- >
- >I seem to get WinRPI installed correctly. I issue the required the
- >init string from within Trumpet. I'm also using S96=46
- >
- >I get the following response
- >
- >CARRIER 14400
- >PROTOCOL: LAP-M
- >COMPRESSION: V.42BIS
- >CONNECT 57600/ARQ
- >
- >So apparently WinRPI seems to be doing its thing.
- >
- >And the login.cmd script completes successfully. As soon as
- >I launch Netscape, it starts to load, but immediately GPF's, and
- >I have to reboot (can't just close Netscape and continue).
- >
- >There is no problem when WinRPI is disabled. I've also tried
- >WinRPI 2.23 with no success.
- >
- >Has anyone seen this type of problem?
- >
- >Gary
- >
- >
- >
- I had the same problem with a 14.4 sporster SI. I fixed it by returning the modem to CompUSA and getting a Hayes Accura
- 14.4. Sad to say, it gave me a bad taste about US Robotics, which is why I bought a Hayes.
-